uTorrent [ VerSion 2.0.1 ] TipS

Have you upgraded lately from a uTorrent older - 2.0/1.8x - release to the new V 2.01/x ?
Is it a new install of uTorrent ?
Cannot reach the speed you used to have ?
Having some memory issues ? CPU load increase ?
Router/Internet are overloaded ?






(1.) If nothing works for you... :



No downloads, no seeding , active torrents are in red, no green net-status, in trackers' tab - none are connecting... check this:

[1] If you have a router - check that your port is still being forwarded and is opened [Control-G->setup guide] and for both TCP + UDP

[2] Check that you have enabled/excluded the new release in your Windows firewall/3rd party firewall (replacing the old rules)







(A) For fixing CPU load/memory issues/stability:



[1] In pref.->advanced->Disk Cache Make sure :

1a. ->Disable Windows caching of disk writes/reads - are both checked

1b. ->reduce memory usage when the cahce is not needed - is unchecked

[2] Make sure pref.->advanced->gui.transparent_graph_legend is false.

[3] Win7 users might experience uTorrent process not closing properly.









( For improving low speed issues:

[1] Make sure your upload speed limit is correctly set to about 70-80% of your connection's maximum upload-speed/cap (you can confirm it @ http://speedtest.net or use the options->setup-guide (control-G) )


[2] Settings that might improve (reduce) your overhead:
2a. Set pref->advanced->net.utp_dynamic_packet_size =false
2b. Set pref->advanced->net.utp_initial_packet_size = 8 (use MTU size)

[3] Set pref.->advanced->bt.tcp_rate_control = false

[4] If you want to use your full line speed capacity for download, but your connection upload:download-speeds/cap ratio is bad (lower than 1:10, such as an ADSL 10 Mbits/sec download :and: 800 Kbits/sec upload) you can reduce the use of uTP (and the larger overhead caused by it):
4a. Support only uTP incoming connections by setting pref->advanced->bt.transp_disposition = 29
4b. Alternatively - disable the use of uTP by pref->BitTorrent->Enable Bandwidth Management = unchecked













(C) For improving Internet chocking / router issues:

[1] First, make sure you have set a proper upload speed limit { (.[1] above) and that your max # of connections/slots are per the setup-guide

[2] Change setting per { (.[3] above }

[3] Set your pref->advanced->bt.connect_speed = 5

[4] Set your pref->advanced->net.max_halfopen = 8

c'mmon legen even u can copie of pictures!!!no??lmfao

thnxs....for tips

Hi,

I am new to this site, I have downloaded a couple of films which I have saved into a folder, upto last Friday everything worked fine, when I downloaded films it used to give me a 'status' of downloading, via 1click downloader staus bar, but for some reason this no longer works, its just saves to my folder with the 1click downloader icon but it dose not connect???

Please can you advise?